Aller au contenu principal

Introduction

This guide introduces how to fix Joy-Con drift for the Nintendo Switch Joy-Cons

Joy-Con drift is when the Nintendo Switch thinks that the analog stick ( also known as the joystick, controller stick, or thumbstick) of the Joy-Con is moving, but it isn't.

Joy-Con drift may occur as you use the Joy-Cons over time from dust and hair buildup. This guide does not need to disassemble the Joy-Con. In addition, this guide will not corrode any parts of your Joy-Con controller.

Outils

Pièces

Aucune pièce spécifiée.

  1. How to Fix Joy-Con Drift Without Disassembly, How to Fix Joy-Con Drift Without Disassembly: étape 1, image 1 de 2 How to Fix Joy-Con Drift Without Disassembly, How to Fix Joy-Con Drift Without Disassembly: étape 1, image 2 de 2
    • Press and hold the black round button on the back of the Joy-Con, then slide it forward to remove.

  2. How to Fix Joy-Con Drift Without Disassembly: étape 2, image 1 de 2 How to Fix Joy-Con Drift Without Disassembly: étape 2, image 2 de 2
    • Open the 404B contact cleaner and insert the tube into the nozzle.

  3. How to Fix Joy-Con Drift Without Disassembly: étape 3, image 1 de 1
    • Push the Joy Stick to the side and hold.

  4. How to Fix Joy-Con Drift Without Disassembly: étape 4, image 1 de 2 How to Fix Joy-Con Drift Without Disassembly: étape 4, image 2 de 2
    • Use tweezers to lift the rubber ring under the Joy Stick, and hold.

  5. How to Fix Joy-Con Drift Without Disassembly: étape 5, image 1 de 2 How to Fix Joy-Con Drift Without Disassembly: étape 5, image 2 de 2
    • Aim the contact cleaner's nozzle at the gap and spray 404B contact cleaner once or twice.

  6. How to Fix Joy-Con Drift Without Disassembly: étape 6, image 1 de 3 How to Fix Joy-Con Drift Without Disassembly: étape 6, image 2 de 3 How to Fix Joy-Con Drift Without Disassembly: étape 6, image 3 de 3
    • Rotate the Joy Stick for 30 seconds to allow full penetration of the liquid inside.

  7. How to Fix Joy-Con Drift Without Disassembly: étape 7, image 1 de 1
    • Wait 10 minutes for the liquid to dry completely.

  8. How to Fix Joy-Con Drift Without Disassembly: étape 8, image 1 de 3 How to Fix Joy-Con Drift Without Disassembly: étape 8, image 2 de 3 How to Fix Joy-Con Drift Without Disassembly: étape 8, image 3 de 3
    • Insert the Joy-Con back into the Switch to test the Joy-Con.

    • Navigate to System Settings > Controllers and Sensors > Calibrate Control Sticks.

    • Follow the on-screen prompts on your Switch.

Conclusion

Enjoy your Joy-Con being able to work properly again!

6 autres ont terminé cette réparation.

Weijie Chen

Membre depuis le 16/01/2022

310 Réputation

1 tutoriel rédigé

Équipe

York University, Team 1-3, O'Regan Winter 2022 Membre de l'équipe York University, Team 1-3, O'Regan Winter 2022

YORK-O'REGAN-W22S1G3

1 membre

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 28

7 derniers jours : 311

30 derniers jours : 1,253

Total : 5,483