Réparez vos affaires

Droit à la réparation

Boutique

How to Fix a Broken Zipper

Rédigé par : Katalina Holbrook (et un autre contributeur)
  • Commentaires : 1
  • Favoris : 15
  • Réparations terminées : 9

Difficulté

Facile

Étapes

7

Temps nécessaire

10 - 15 minutes

Sections

1

Drapeaux

0

Introduction

This guide will thoroughly explain how to easily repair a zipper that is broken. No special requirements needed; just needle-nose pliers, scissors, and a needle and thread!

  1. Take the needle nose pliers and remove the metal or plastic stopper at the end of the zipper. Zip the zipper all the way down to the last set of teeth. Zip the zipper all the way down to the last set of teeth.

    • Take the needle nose pliers and remove the metal or plastic stopper at the end of the zipper.

    • Zip the zipper all the way down to the last set of teeth.

    Modifier

  2. Align both sides of the zipper evenly and slip the zipper back on track. Align both sides of the zipper evenly and slip the zipper back on track. Align both sides of the zipper evenly and slip the zipper back on track.

    • Align both sides of the zipper evenly and slip the zipper back on track.

    Modifier

  3. Start zipping up the zipper to make sure it has been aligned properly. Start zipping up the zipper to make sure it has been aligned properly. Start zipping up the zipper to make sure it has been aligned properly.

    • Start zipping up the zipper to make sure it has been aligned properly.

    Modifier

  5. Thread the needle. Sew up the area where the metal or plastic stopper used to reside. Sew up the area where the metal or plastic stopper used to reside.

    • Thread the needle.

    • Sew up the area where the metal or plastic stopper used to reside.

    Modifier

  6. Tie off what has been sewn by making a knot in the thread. Tie off what has been sewn by making a knot in the thread. Tie off what has been sewn by making a knot in the thread.

    • Tie off what has been sewn by making a knot in the thread.

    Modifier

  7. Take the scissors and cut off the access thread. Get as close to the knot as you can without cutting it off. Take the scissors and cut off the access thread. Get as close to the knot as you can without cutting it off.

    • Take the scissors and cut off the access thread. Get as close to the knot as you can without cutting it off.

    Modifier

  8. Zip up the garmet to make sure everything is working properly. Zip up the garmet to make sure everything is working properly. Zip up the garmet to make sure everything is working properly.

    • Zip up the garmet to make sure everything is working properly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autre(s) ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Katalina Holbrook

Membre depuis le 02/06/2017

479 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

Arkansas State University, Team S1-G11, Chamberlain Summer 2017 Membre de l'équipe Arkansas State University, Team S1-G11, Chamberlain Summer 2017

ARSU-CHAMBERLAIN-SU17S1G11

1 membre

1 tutoriel rédigé

Un commentaire

Ajouter un commentaire

Not helpful. Suppose if the slider part broke and is now now. Now what?

Walter Nagel - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 39

Total : 2,247