Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 1, image 1 de 1
    • Connect up the car camera to your PC via a USB cable.

    • Browse through the settings menu and key in any required information. E.g Time & Date Stamp, Voice Recording(On/Off)

    • Insert a Class 10 SD Card and format the SD Card using the device's setting menu.

    • Try recording a video at your computer desk and test the playback function

  2. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 2, image 1 de 1
    • Plunge the camera with the suction cup to your preferred point.

    • Tip: Wet the windscreen with some clean water before plunging in the suction cup for a stronger hold.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 3, image 1 de 1
    • Start tucking the USB Cable into the gap above the passenger seat.

    • Align the cable between the gap and secure the cable in place by pushing in the wires using your four fingers.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 4, image 1 de 1
    • The side door trunking can be easily detached by giving it a firm nudge.

    • Hide the cable beneath the trunking leaving the free end nearer to the passenger seat as depicted in the picture.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 5, image 1 de 1
    • Push the cable into the rubber sleeve using your thumb

    • Keep your thumb in the sleeve and run the cable downwards until you reach the glove compartment area.

  6. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 6, image 1 de 1
    • Use some duct tape to hold the cables in place if there are no crevices underneath your glove compartment.

    • Hang on there, you're almost done.

  7. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 7, image 1 de 1
    • Plug in the USB convertor into the Cigar Jack Port.

    • Connect up the USB cable of the car camera into the port.

    • Start your engine if you haven't done so, car camera should switch on automatically upon detecting power from the car.

  8. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 8, image 1 de 1
    • Ensure the camera is powered correctly, look for a charging indicator icon on your car camera device.

    • Make sure there is a red rounded icon that indicates "Record in Progress" before you drive off everyday.

    • You are done, enjoy the reassuring driving experience and be safe.

Ligne d'arrivée

4 autres ont terminé cette réparation.

Alden

Membre depuis le 07/01/16

281 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 21

30 derniers jours : 60

Total : 2,634