Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Window cleaner or soapy water sprayed on the tire is a quick method for identifying the location of a leak. Always check the valve stem in addition to the tire itself.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Once you've identified the leak, prepare the tire and plug before removing the foreign object causing the leak (usually a nail or screw)
-
Prepare your tire plug by feeding it through the eye of the insertion needle before pulling any objects from the tire that maybe causing leaks.
-
Make sure your tire is well inflated. Inflate it to the maximum listed on the tire sidewall.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the foreign object with pliers or a similar tool.
-
Immediately insert the reamer to plug the hole.
-
Without removing it, plunge the reamer into the tire several times to make a uniform hole.
-
Leave the reamer inserted in the tire until the needle with plug is ready to insert.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert 90% of the plug into the tire, leaving just short ends exposed.
-
Pull the needle out slowly, leaving the plug in the tire.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Trim the plug ends flush with the tire.
-
Recheck for leaks with window cleaner or soapy water.
-
Reset your tire pressure to the correct specification for your vehicle.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.