Réparez vos affaires Communauté Boutique

How to Reassemble the Palm IIIc

Ce dont vous avez besoin

  1. How to Reassemble the Palm IIIc, How to Reassemble the Palm IIIc: étape 1, image 1 de 1

    • Reinsert the screen into the case that contains the buttons.

    Traduire

  2. How to Reassemble the Palm IIIc: étape 2, image 1 de 1

    • Put the Motherboard back into casing from right to left.

    • Make sure the black clips are securing the motherboard into the casing.

    Traduire

  3. How to Reassemble the Palm IIIc: étape 3, image 1 de 3 How to Reassemble the Palm IIIc: étape 3, image 2 de 3 How to Reassemble the Palm IIIc: étape 3, image 3 de 3

    • Secure the bottom two ZIF connectors into their slots by opening the flap and inserting the ZIF connectors.

    • Gently press down on the flap to secure the ZIF connector. This secures the screen and buttons to the motherboard.

    Traduire

  5. How to Reassemble the Palm IIIc: étape 4, image 1 de 2 How to Reassemble the Palm IIIc: étape 4, image 2 de 2

    • Connect the blue and red screen cables to the beige box they were removed from.

    Traduire

  6. How to Reassemble the Palm IIIc: étape 5, image 1 de 2 How to Reassemble the Palm IIIc: étape 5, image 2 de 2

    • Open the ZIF connector box at the top of the motherboard by gently pulling up on the flap.

    • Insert the ZIF tab into the connector box.

    • Gently press down on the flap to secure the ZIF tab in place.

    Traduire

  7. How to Reassemble the Palm IIIc: étape 6, image 1 de 1

    • Attach the white box on the end of the red cable connected to the battery into the connector box on the motherboard.

    Traduire

  8. How to Reassemble the Palm IIIc: étape 7, image 1 de 1

    • Place the front and back covers around the casing containing the motherboard and screen.

    • Before securing the covers, place the sensor in between the front and back cover at the top of the device.

    • After the sensor is in place between the two covers, firmly secure the front and back covers.

    Traduire

  9. How to Reassemble the Palm IIIc: étape 8, image 1 de 1

    • Replace the long screws at the top of the back case with the Philips head screwdriver.

    • Replace the short screws to the bottom of the back case using the Philips head screwdriver.

    • After the screws are in place, insert the stylus.

    Traduire

  10. How to Reassemble the Palm IIIc: étape 9, image 1 de 1

    • Gently snap the flip cover back into place where it connects at the top of the Palm IIIc

    Traduire
Ligne d'arrivée

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Angela Arthur

Membre depuis le 02/16/12

101 Réputation

1 tutoriel rédigé

Badges: 3

Équipe

Ohio State, Team 1-5, Buehl Winter 2012 Membre de l'équipe Ohio State, Team 1-5, Buehl Winter 2012

OSU-BUEHL-W12S1G5

5 membres

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 241