Aller au contenu principal

How to Remove Stock Stereo Head Unit in a Toyota Tacoma

Ce dont vous avez besoin

  1. How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Bezel Removal: étape 1, image 1 de 2 How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Bezel Removal: étape 1, image 2 de 2
    • Ensure that the vehicle is off and the battery is disconnected.

    • Remove the plastic trim pieces by pulling them straight back.

    • Pulling from behind the vents on each side one at a time is the smoothest way to pull the panel off.

  2. How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Unbolting the Unit: étape 2, image 1 de 2 How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Unbolting the Unit: étape 2, image 2 de 2
    • Unscrew the four bolts on the sides of the stereo using a 10 mm socket with a ratchet or an impact driver.

  3. How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Removing the Stereo from the Dash: étape 3, image 1 de 1
    • Carefully remove the stereo out of the dash to expose the wires in the back of the unit.

  4. How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Disconnecting the Wiring: étape 4, image 1 de 3 How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Disconnecting the Wiring: étape 4, image 2 de 3 How to Remove Stock Stereo Head Unit in a Toyota Tacoma, Disconnecting the Wiring: étape 4, image 3 de 3
    • Remove all 9 wires from the back of the stereo by pushing down the safety clips and set the unit aside.

    • Have someone hold the stereo while disconnecting the wires.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Sean

Membre depuis le 04/23/21

139 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 33

Total : 1,354