Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Place the calculator screen facing down, with the back plate facing up.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the six 7.3 mm screws from the back of the calculator using a Phillips #000 screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the latch to the right to release the keypad.
-
Pull the keypad down at the same time.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the screw near the bottom of the calculator on the front side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the calculator over so the back plate faces up.
-
Use the iFixit Opening Tool to carefully pry the back plate out at the bottom right corner.
-
Repeat the prying step on the middle right side, moving along the perimeter of the calculator.
-
Repeat the prying step on the top right corner.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use your hands to manually separate the now loosened back plate from the calculator.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.