Introduction

In this guide I will be providing the information on how to repair a textured wall. For this repair I am mainly focusing on the repairing wall texture but in most cases where there is damages wall texture there is a damaged wall. So, I will be showing how to prepare for the fixing of the wall texture as well.

First, Inspect and clean the location that needs repair.
  • First, Inspect and clean the location that needs repair.

Ajouter un commentaire

Clean up the edges with a box cutter.
  • Clean up the edges with a box cutter.

Ajouter un commentaire

  • Apply a single sided mesh tape used for patch work to increase the strength of the material.

Ajouter un commentaire

  • Apply spackling paste over the mesh tape to fill the hole.

Ajouter un commentaire

  • Let the spackling paste sit and dry.

  • The quick dry spackling paste will change colors from a pink to a white indicating that the paste has dried.

Ajouter un commentaire

  • Sand the rough edges of the spackling paste to smooth the surfaces until it is flush with the wall.

Ajouter un commentaire

  • Spray aerosol wall texture over the leveled patch in a quick fluid motion from one side to another.

Ajouter un commentaire

  • Let the texture dry overnight.

  • Paint the wall with your desired color to complete the wall texturing repair.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jeffrey Dean

Membre depuis le 29/01/2018

157 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 11