Réparez vos affaires Communauté Boutique

How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan

Introduction

The purpose of this technical description is to explore the Utilitech SFC1-500B 20” High Velocity Floor Fan at the system-level, then discuss the important parts directly related to using the device. This description will give the user a basic idea of fan’s design and operation so as to become more proficient in its use.

Ce dont vous avez besoin

  1. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan, Fan Blade Assembly: étape 1, image 1 de 1

    • Unplug fan prior to repair.

    • Remove the Phillips #2 screws securing the fan cover.

    Modifier

  2. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan: étape 2, image 1 de 1

    • Remove the fan cover.

    Modifier

  3. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan: étape 3, image 1 de 1

    • Remove the screws holding the plastic wire cover with a Phillips #2 screwdriver and flexible extension.

    • If the above attachment is unavailable, use a crescent wrench or pliers to grip the screwdriver for additional torque.

    Modifier

  5. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan: étape 4, image 1 de 1

    • Remove the green wire that is attached to the motor housing.

    Modifier

  6. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan: étape 5, image 1 de 1

    • Remove the nuts securing the motor to the back cover of the fan, using a Phillips #2 screwdriver and an 8mm socket driver.

    Modifier

  7. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan: étape 6, image 1 de 1

    • Remove the power cord from the back cover by sliding the wire off of the two metal rails holding them together.

    Modifier

  8. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan: étape 7, image 1 de 1

    • Remove the motor from the back of the fan cover.

    Modifier

  9. How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan: étape 8, image 1 de 1

    • The fan is fully disassembled; replace the damaged parts.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 10 autres contributeurs

EngineeringCorpsman

Membre depuis le 06/24/15

172 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

Colorado Springs, Team 1-4, Mcmichael SU 2015 Membre de l'équipe Colorado Springs, Team 1-4, Mcmichael SU 2015

UCCS-MCMICHAEL-SU15S1G4

2 membres

1 tutoriel rédigé

6 commentaires

do you have the wiring schematics for this fan my wire broke from the copper coil thank you

Timothy Thomas - Réponse

My Ulitiech fan suddenly stopped working. What can I do to get it to work again. Or is it my new door stop?

Belinda Blodgett - Réponse

Where can I find replacement blades for this fan?

Jason - Réponse

My cord on my utilitech floor fan was severed by my table saw and I’ve spliced the cord and it still won’t work. Could there be a reset button or something I’m missing?

Steve Case - Réponse

You title this on how to remove the fan blades then don't actually show how to remove the fan blades but get the whole motor with the fan blades attached.

Justin Edgell - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 15

30 derniers jours : 30

Total : 10,137