How to Shorten Pant Legs With a Sewing Machine

Pour réparer ensemble - Je crée un compte

Introduction

If you have a pair of pants which need a fitting adjustment, this guide will help you tailor your pants to fit.

Many people buy pairs of pant online only to find that the fitting is not right. Instead of throwing away your pair of pants, use this guide to tailor them using a sewing machine and common tailoring supplies.

This guide requires you to know your fitting size and measurements.

Ce dont vous avez besoin

Étape 1 How to Shorten Pant Legs With a Sewing Machine

How to Shorten Pant Legs With a Sewing Machine, How to Shorten Pant Legs With a Sewing Machine: étape 1, image 1 de 1

Flip the pairs of pants inside out.
The seam lines should be visible, markings the inside of the pants will allow for an easier clean up.
Place your pants on a flat surface and flatten the pant leg.

Modifier

Demander à FixBot

Étape 2

Measure the width of the pant leg using a ruler or measuring tape.
Mark your fitting size on the pants using tailoring chalk.

Modifier

Demander à FixBot

Étape 3

Use a seam ripper to unseam the hem of your pants a little bit past your fitting line.
Make another marking from your fitting line, leaving half an inch of space in between the two.
In this case, the top line is our fit line and the bottom line is our cut line.

Modifier

Demander à FixBot

Étape 4

How to Shorten Pant Legs With a Sewing Machine: étape 4, image 3 de 3

Use a comma ruler to extend both of your markings up the length of the pants.
Cut along the lower line.

Modifier

Demander à FixBot

Étape 5

How to Shorten Pant Legs With a Sewing Machine: étape 5, image 3 de 3

Sew your new seam along thefitting line.
As you get closer to the original seam, blend your new seam into the original.
Sewing machines can easily cause injuries, use caution when operating and go slow.