Réparez vos affaires Communauté Boutique

How to Test the Valve System on a Fisher Paykel Neopuff

Matériel médical
Ni iFixit ni ce tutoriel de réparation ne sont approuvés par ou affiliés au fabricant de ce dispositif médical.

Introduction

Please refer to page 7 of the device’s Technical Manual for source information.

    • Set the gas supply to 5 L/min.

    Modifier

  2. How to Test the Valve System on a Fisher Paykel Neopuff: étape 2, image 1 de 1

    • Completely close the Peak Inspiratory Pressure control and the Max Pressure control by turning both knobs completely clockwise.

    Modifier

  3. How to Test the Valve System on a Fisher Paykel Neopuff: étape 3, image 1 de 1

    • Close the bleed valve and check that the gauge reads at least 60 cmh2O.

    Modifier

    • Set the gas supply to 15 L/min.

    Modifier

  5. How to Test the Valve System on a Fisher Paykel Neopuff: étape 5, image 1 de 1

    • Close the bleed valve and check that the gauge reads no higher than 80 cmH2O.

    Modifier

    • Set the gas supply to 10 L/min.

    Modifier

    • Close the bleed valve and turn the Max Pressure Relief valve until the manometer reads 40 cmh2O.

    Modifier

    • Check that the manometer needle rises and falls smoothly.

    Modifier

    • Gently rotate the Max Pressure Relief cover over the Max Pressure Relief knob.

    Modifier

  10. How to Test the Valve System on a Fisher Paykel Neopuff: étape 10, image 1 de 1

    • Reset the peak inspiratory pressure to 20 cmh2O and turn off the gas flow. Testing is now complete. If the F&P Neopuff/Perivent Infant Resuscitator fails any of these tests, the valve assembly should be regarded as faulty and replaced with a new valve assembly (see the parts list (section 4.1.2) for part numbers).

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Constantine Yap

Membre depuis le 05/04/20

364 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team S1-G6, Zimmerman Spring 2020 Membre de l'équipe Cal Poly, Team S1-G6, Zimmerman Spring 2020

CPSU-ZIMMERMAN-S20S1G6

4 membres

27 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 497