Aller au contenu principal

Introduction

Has debris found its way between the casing and the screen? Use this guide to remove and clean the screen.

As handling the display housing may damage the wire strip, use caution.

Pièces

Aucune pièce spécifiée.

  1. On the door's bottom edge, locate the gap between the external and internal screen covers.
    • On the door's bottom edge, locate the gap between the external and internal screen covers.

    • Using a spudger (not shown), gently pry apart the external and internal covers until the sides start to separate.

    • Continue working your way along the edges of the phone, alternating sides, until the external cover can be easily removed.

  2. On the display housing, locate and unscrew the four corner T6 Torx screws connecting the housing and the internal cover. On the display housing, locate and unscrew the four corner T6 Torx screws connecting the housing and the internal cover.
    • On the display housing, locate and unscrew the four corner T6 Torx screws connecting the housing and the internal cover.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. The fragile wire strip connecting the display housing to the circuit board is located on the left side of the inner hinge. Locate the gap between the display housing and internal cover, in the same manner you would flip open the phone, use your finger (not shown) to lift the housing from the cover and set it down.
    • The fragile wire strip connecting the display housing to the circuit board is located on the left side of the inner hinge.

    • Locate the gap between the display housing and internal cover, in the same manner you would flip open the phone, use your finger (not shown) to lift the housing from the cover and set it down.

  5. Using a lens cloth, wipe away any dust or debris from the display or screens.
    • Using a lens cloth, wipe away any dust or debris from the display or screens.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Amy

Membre depuis le 15/10/2012

1 Réputation

4 tutoriels rédigés

Équipe

University of Maine, Team 1-4, Diaz Fall 2012 Membre de l'équipe University of Maine, Team 1-4, Diaz Fall 2012

UMAINE-DIAZ-F12S1G4

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 222