Aller au contenu principal

Introduction

This is a guide overview how to clean your VCR heads in your Panasonic DVD/VCR player.

Pièces

Aucune pièce spécifiée.

  1. With the front display of the device facing you, rotate the device 90 degrees counter clockwise. Remove the screw that is on the right side of the panel facing you. Now rotate the device 180 degrees and remove the second screw.
    • With the front display of the device facing you, rotate the device 90 degrees counter clockwise.

    • Remove the screw that is on the right side of the panel facing you.

    • Now rotate the device 180 degrees and remove the second screw.

    • Remove all screws with a phillips head screwdriver.

  2. Rotate the device so that the back faces you. With a phillips head screwdriver, locate and remove the 12 screws highlighted by the red circles in image one.
    • Rotate the device so that the back faces you.

    • With a phillips head screwdriver, locate and remove the 12 screws highlighted by the red circles in image one.

  3. Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

    Acheter maintenant
  4. Before removing cover make sure that the back of the device is facing you.
    • Before removing cover make sure that the back of the device is facing you.

    • Remove the top cover by bending out on the sides, and pulling the cover towards you while applying upward pressure.

  5. Before cleaning the VCR heads, be sure that the front of the device is facing you with the top cover removed. Locate the two VCR heads highlighted in by the blue boxes in image one. GENTLY clean heads with a microfiber rag and a cleaning solution of your choice.
    • Before cleaning the VCR heads, be sure that the front of the device is facing you with the top cover removed.

    • Locate the two VCR heads highlighted in by the blue boxes in image one.

    • GENTLY clean heads with a microfiber rag and a cleaning solution of your choice.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Nathan Cheadle

Membre depuis le 15/04/2010

137 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 16-5, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 16-5, Maness Spring 2010

CPSU-MANESS-S10S16G5

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 10

Total : 1,937