Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This tutorial will use how to enter DFU Mode if in case your iPod Classic needs to be restored. And how to restore iPod properly.

  1. Hold the menu and the center button for about 8 seconds until you see the Apple logo. But keep holding when you see apple logo until it off.
    • Hold the menu and the center button for about 8 seconds until you see the Apple logo. But keep holding when you see apple logo until it off.

    • Don't hold too much power on your iPod Classic. If you hold menu and center button too much, then the Menu and Center button dosen't work.

    • Connect your iPod Classic into the computer and click continue. When you the the recovery message, click OK. And click on "Restore iPod" and wait until it finished restore.

Conclusion

After you restore, just sync your music, video or games into your iPod and enjoy. If it dosen’t work, try repeat again this guide.

2 autre(s) ont terminé cette réparation.

Tokusan Guide

Membre depuis le 26/05/2020

643 Réputation

6 tutoriels rédigés

Équipe

Tokusan Zone 1A Membre de l'équipe Tokusan Zone 1A

Community

1 membre

8 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 8

7 derniers jours : 41

30 derniers jours : 171

Total : 1,112