Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
-
A l'aide d'un outil en plastique ou votre ongle, soulevez le dispositif retenant la nappe du bouton home.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
You need really thin blade to carefully peel off the plastic film from the back of the button. Do NOT touch the glue with your finger!
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After disassembly, you need some white spirit and cotton buds to clean up greenish oxide on both: button back contacts and steel cap's inside.
-
Last picture shows cleaned details.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
On reassembly, you have to position the steel cap in the center of copper contact ring, placing plastic sticker into its respective cavity on the back of the button.
-
Press the sticker firmly into its place. Don't worry if it doesnt stick all the way round. its position under the glass keeps the details in place. Again, try to prevent touching the glue while disassembling.
-
Congrats! Re-assemble your device and enjoy your revived home button!
-
Annulation : je n'ai pas terminé ce tutoriel.
37 autres ont terminé cette réparation.