Réparez vos affaires Communauté Boutique

How to put an iPod Classic into Debug mode

Introduction

Hey everyone. In this guide, I will be showing you how to put your iPod Classic into Debug mode.

  1. How to put an iPod Classic into Debug mode, Rebooting your iPod: étape 1, image 1 de 3 How to put an iPod Classic into Debug mode, Rebooting your iPod: étape 1, image 2 de 3 How to put an iPod Classic into Debug mode, Rebooting your iPod: étape 1, image 3 de 3

    • Press down on the Center and Menu buttons until the iPod restarts.

    • If your iPod is dead, plug it in and make sure the Hold Switch located on top of the device is in the unlocked position.

    • When you do this, it's important to restart into the iPod's default OS.

    Traduire

  3. How to put an iPod Classic into Debug mode, Accessing Debug mode: étape 2, image 1 de 1

    • Hold down the Previous Track and Center buttons.

    • The screen should display the Apple logo. Once the screen turns white, it is safe to release the two buttons.

    Traduire

  4. How to put an iPod Classic into Debug mode, Navigation of the Debug Menu: étape 3, image 1 de 1

    • Navigation of the Menu will help out with using the iPod to figure out it's problem.

    • Press Menu to return to the previous screen, or the next screen in some cases.

    • The Centre button executes the function currently selected.

    • Skip Track and Previous Track buttons are used to scroll through the lines.

    Traduire
Ligne d'arrivée

5 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

Jayden Montes

Membre depuis le 08/29/20

301 Réputation

1 tutoriel rédigé

Badges: 9

+ 6 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 58

30 derniers jours : 268

Total : 4,673