How to replace a QMR Rail-Hook on a bike bag. (new bike bag)

Pour réparer ensemble - Je crée un compte

Introduction

A QMR Rail Hook on your hardback panel (attachment hook on the rack) is responsible for the correct positioning of the bike bag on your rack. It can be re-attached or replaced in a few easy steps.

Ce dont vous avez besoin

1. Étape 1 QMR Rail-Hook
  To remove the broken buckle, you will need a large flat head screwdriver.
  Traduire
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
2. Étape 2
  Disassemble: Unscrew the orange dial and remove the damaged QMR rail hook and wire spring.
  Traduire
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
4. Étape 3
  Pry out the washer using two flat head screwdrivers.
  Traduire
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024
5. Étape 4
  Push the new washer in and use the screwdriver to move it into place. Place the threaded oval plate and wire spring directly on top of each other. The hole of the threaded plate must be directly above the hole of the washer. Screw on the new QMR Rail Hook.
  
  Please note: The QMR rail hook must click into place — then you’ll know it is correctly threaded.
  Traduire
  
  Demander à FixBot
  
  Ajouter un commentaire
  
  1024