Introduction

If your steering column suddenly collapses into itself, this guide is for you. This guide will show you how to tighten the T-tube column to prevent that from happening.

  1. Locate the T-tube clamp. It is in the middle of the steering column.
    • Locate the T-tube clamp. It is in the middle of the steering column.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Open the clamp by pulling the lever away from the scooter. Open the clamp by pulling the lever away from the scooter.
    • Open the clamp by pulling the lever away from the scooter.

  4. Locate the screw on the side of clamp. Turn the screw on the side of the clamp by hand in a clockwise direction.
    • Locate the screw on the side of clamp.

    • Turn the screw on the side of the clamp by hand in a clockwise direction.

    • Attempt to close the clamp. If the lever is too tight to close, loosen the screw slightly and try again.

    • The T-tube should now be locked in place. If it continues to fall down, repeat the instructions in this guide.

Ligne d'arrivée

Jordyn

Membre depuis le 09/10/2012

358 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 9-13, Amido Fall 2012 Membre de l'équipe Cal Poly, Team 9-13, Amido Fall 2012

CPSU-AMIDO-F12S9G13

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 50

Total : 2,422