How to tighten the Razor A handlebar clamp

Introduction

If your steering column suddenly collapses into itself, this guide is for you. This guide will show you how to tighten the T-tube column to prevent that from happening.

Étape 1 How to tighten the Razor A handlebar clamp

How to tighten the Razor A handlebar clamp, How to tighten the Razor A handlebar clamp: étape 1, image 1 de 1

Locate the T-tube clamp. It is in the middle of the steering column.

Traduire

Étape 2

Open the clamp by pulling the lever away from the scooter.

Traduire

Étape 3

Locate the screw on the side of clamp.
Turn the screw on the side of the clamp by hand in a clockwise direction.
Attempt to close the clamp. If the lever is too tight to close, loosen the screw slightly and try again.
The T-tube should now be locked in place. If it continues to fall down, repeat the instructions in this guide.