Danger
Potentiellement dangereux
Risque de blessure si cette procédure n'est pas suivie correctement. Faites preuve de prudence et suivez tous les avertissements.
Danger

Introduction

Alcatel Pixi 4 8050G that does not turn on.

Connect the (logicboard) to the Baku source at 3.4V to test the ignition without the battery.

Then, reactivate the battery with the baku source at 5V.

Note: the phone was immediately turned off with the BAKU source because it does not detect the battery IC (where it controls charging). It means that the (logicboard) works and you only need to reactivate the battery or buy a new one.

Instructions vidéo

Conclusion

Note: the phone was immediately turned off with the BAKU source because it does not detect the battery IC (where it controls charging). It means that the (logicboard) works and you only need to reactivate the battery or buy a new one.

@HectorNavarroMX

Membre depuis le 25/06/2018

912 Réputation

14 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 30

Total : 30