Aller au contenu principal

Introduction

Follow the guide to replace touchscreen glass

  1. Open the SD slot and remove the screw hidden under the sticker.
    • Open the SD slot and remove the screw hidden under the sticker.

  2. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover.
    • Use an opening pick to disengage the clips securing the back cover.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables. Disconnect the touchscreen connector. Disconnect the display connector.
    • Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables.

    • Disconnect the touchscreen connector.

    • Disconnect the display connector.

  5. Remove the 6 screws that secure the 2 metal stripes holding the display. Remove the display. Remove the display.
    • Remove the 6 screws that secure the 2 metal stripes holding the display.

    • Remove the display.

  6. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.
    • Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.

  7. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.
    • Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.

Conclusion

To assemble the device, follow these instructions in reverse order.

17 autre(s) ont terminé cette réparation.

Merci à ces traducteurs :

100%

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Smilzo

Membre depuis le 09/11/2013

5 618 Réputation

33 tutoriels rédigés

Not very clear unlike other guides I have followed….

Tracey Homeward - Réponse

Ottimo video,

ti chiedo un consiglio, stavo cambiando il display al mio Huawei T1 A21 quando il connettore sul circuito stampato che collega il touch-screen si è danneggiato.

E’ un connettore particolare 25 pin + 28 e non riesco a trovarlo, sai dirmi come reperirlo?

grazie

Antonio

Antonio Durighello - Réponse

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - Réponse

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 7

7 derniers jours : 65

30 derniers jours : 256

Total : 13,807