Aller au contenu principal

Huawei P10 Back Cover Replacement

Ce dont vous avez besoin

  1. Huawei P10 Back Cover Replacement, Back Cover: étape 1, image 1 de 3 Huawei P10 Back Cover Replacement, Back Cover: étape 1, image 2 de 3 Huawei P10 Back Cover Replacement, Back Cover: étape 1, image 3 de 3
    • Switch off your phone.

    • Remove the two Pentalobe P2 screws at the bottom.

    • Remove the SIM card tray.

  2. Huawei P10 Back Cover Replacement: étape 2, image 1 de 3 Huawei P10 Back Cover Replacement: étape 2, image 2 de 3 Huawei P10 Back Cover Replacement: étape 2, image 3 de 3
    • Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.

    • Carefully pry the display with its parts out of the case.

    • Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.

    • After you pried out the bottom end, use the opening tool to open the clamps on both sides.

  3. Huawei P10 Back Cover Replacement: étape 3, image 1 de 2 Huawei P10 Back Cover Replacement: étape 3, image 2 de 2
    • Don't open the phone all the way, yet. The cable for the standby and volume buttons is still connected to the back cover.

    • Swing open the phone backwards.

    • Use a spudger to disconnect the power- and volume button flex cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autres ont terminé cette réparation.

Dominik Schnabelrauch

Membre depuis le 11/23/16

203 329 Réputation

682 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

16 817 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 11

30 derniers jours : 52

Total : 7,786