Aller au contenu principal

Huawei P9 Back Cover

Ce dont vous avez besoin

  1. Huawei P9 Back Cover, Back Cover: étape 1, image 1 de 3 Huawei P9 Back Cover, Back Cover: étape 1, image 2 de 3 Huawei P9 Back Cover, Back Cover: étape 1, image 3 de 3
    • First switch off your phone and remove the SIM card tray.

    • Unscrew the two Pentalobe P2 screws located at the bottom next to the device's USB C port.

    • If the screen is cracked you might want to use some tape to protect your eyes from glass shreds and get a better grip to open the phone.

  2. Huawei P9 Back Cover: étape 2, image 1 de 2 Huawei P9 Back Cover: étape 2, image 2 de 2
    • Avoid to lift only the display instead of the whole phone assembly as doing so may cause damage to the screen.

    • Use an iSclack or a suction handle to separate the phone assembly from the rear panel.

    • In case you can‘t manage to lift the phone assembly out of the rear panel you can insert the pointed end of a spudger in the headphone jack opening and press the phone assembly upwards until you create a gap between assembly and rear panel. Then use the spudger to lever the phone assembly out of the panel.

    • Don't remove the rear panel completely yet. There is a cable connected to it! It is running from the finger print sensor to the display unit.

  3. Huawei P9 Back Cover, Fingerprint sensor: étape 3, image 1 de 2 Huawei P9 Back Cover, Fingerprint sensor: étape 3, image 2 de 2
    • Disconnect the fingerprint sensor using a spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autres ont terminé cette réparation.

Tobias Isakeit

Membre depuis le 03/31/14

116 760 Réputation

188 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

322 membres

2 506 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 16

Total : 8,927