HyperX CloudX Flight Charging Port Replacement

Introduction

Over time, foreign material will enter the charging port of your HyperX CloudX Flight and degrade naturally. This can sometimes lead to issues with charging your device. Replacing the port is easy and requires minimal soldering knowledge.

Ce dont vous avez besoin

Étape 1 Charging Port

HyperX CloudX Flight Charging Port Replacement, Charging Port: étape 1, image 1 de 1

Place the device on a flat surface and orient the ear cups towards yourself.

Traduire

Étape 2

Gently pull around the perimeter of the left ear cup until the cushion is fully removed.

Traduire

Étape 3

Use a small Phillips screwdriver to remove the base plate.

Traduire

Étape 4

After removing the plate, locate the charging port on the board. You can carefully desolder the charging port from the board by pointing the tip of your soldering iron to melt the existing connections.

Traduire

Conclusion

To reassemble your device, follow these instructions in reverse order. Ensure to carefully resolder the USB port as to not interfere with other connections.

Une autre personne a terminé cette réparation.