Introduction

This guide provides a step-by-step plan for disassembly of the Impuls LED Alarm Clock Radio. The price of the clock radio is relatively low, it is 16.95 euros at bol.com. The guide is made by 5 Industrial Design students at the TU Delft.

Pièces

Aucune pièce nécessaire.

Unscrew the 4 base screws at the bottom with the Phillips 1 screwdriver.
  • Unscrew the 4 base screws at the bottom with the Phillips 1 screwdriver.

Ajouter un commentaire

Open the top and remove the transparent plastic cap.
  • Open the top and remove the transparent plastic cap.

Ajouter un commentaire

  • Remove the 4 screws from the PCB.

  • It is desirable to use 3 hands because you have to do 3 jobs: screw, hold the top and hold the bottom.

Ajouter un commentaire

  • Remove/unclick 4 plastic buttons.

  • There are 4 different types of buttons.

Ajouter un commentaire

  • Unscrew 2 screws of the radio tuning system.

Ajouter un commentaire

  • Remove the gear that protects the cap.

Ajouter un commentaire

  • Lift up the small gear.

Ajouter un commentaire

  • Lift up the flexible pin rack.

Ajouter un commentaire

  • Remove the flexible pin rack holder.

Ajouter un commentaire

  • Remove 3 screws of the big PCB.

Ajouter un commentaire

  • Remove the backside of the casing.

Ajouter un commentaire

  • Remove the grey double gear.

Ajouter un commentaire

  • Remove the switch casing.

Ajouter un commentaire

  • Flip the big PCB.

Ajouter un commentaire

  • Unscrew 2 screws on the back of the PCB the black gear house.

Ajouter un commentaire

  • Remove the black gear housing.

Ajouter un commentaire

  • Unscrew 2 screws of the electro magnet.

Ajouter un commentaire

  • Lift up the electro magnet.

Ajouter un commentaire

  • Unscrew the cap of the POT meter.

Ajouter un commentaire

  • Remove the big black double gear.

Ajouter un commentaire

  • Remove the hot glue of the antenna.

Ajouter un commentaire

  • Remove all the electrical components by desoldering.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Pascalle van Hemert

Membre depuis le 07/03/2018

325 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 10

Total : 61