Aller au contenu principal

Infant Optics DXR-8 Charging Port Replacement

Ce dont vous avez besoin

  1. Infant Optics DXR-8 Charging Port Replacement, Internal Monitor Components: étape 1, image 1 de 3 Infant Optics DXR-8 Charging Port Replacement, Internal Monitor Components: étape 1, image 2 de 3 Infant Optics DXR-8 Charging Port Replacement, Internal Monitor Components: étape 1, image 3 de 3
    • Using the plastic opening tool, remove screen protector from front of monitor.

  2. Infant Optics DXR-8 Charging Port Replacement: étape 2, image 1 de 3 Infant Optics DXR-8 Charging Port Replacement: étape 2, image 2 de 3 Infant Optics DXR-8 Charging Port Replacement: étape 2, image 3 de 3
    • Remove the six 4mm screws using a Phillips #00 screwdriver.

    • Remove the screen, exposing the circuit board.

    • Turn device over to expose rear circuit board.

  3. Infant Optics DXR-8 Charging Port Replacement: étape 3, image 1 de 3 Infant Optics DXR-8 Charging Port Replacement: étape 3, image 2 de 3 Infant Optics DXR-8 Charging Port Replacement: étape 3, image 3 de 3
    • Disconnect speaker from monitor for ease of access by unplugging wire.

  4. Infant Optics DXR-8 Charging Port Replacement, Charging Port: étape 4, image 1 de 2 Infant Optics DXR-8 Charging Port Replacement, Charging Port: étape 4, image 2 de 2
    • Unscrew the four 3 mm screws holding the motherboard to the unit using a Phillips #00 screwdriver.

  5. Infant Optics DXR-8 Charging Port Replacement: étape 5, image 1 de 2 Infant Optics DXR-8 Charging Port Replacement: étape 5, image 2 de 2
  6. Infant Optics DXR-8 Charging Port Replacement: étape 6, image 1 de 1
    • Remove the old charging port and solder the new one in place.

  7. Infant Optics DXR-8 Charging Port Replacement: étape 7, image 1 de 1
    • Flip the unit over to ensure a correct fitment.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Donovan Zusalim

Membre depuis le 01/24/17

293 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 13-4, Banghart Winter 2017 Membre de l'équipe Cal Poly, Team 13-4, Banghart Winter 2017

CPSU-BANGHART-W17S13G4

4 membres

4 tutoriels rédigés

2 commentaires

I appreciate you posting this. What kind of new charging port did you use (USB type, size, etc) and does IFIXIT sell them?

John Lynch - Réponse

The part you are looking for is a female Micro USB B-Type solder socket. I no longer have the unit available to confirm, but I'll bet you could contact Infant Optics and confirm with them. Sorry I can't be of more help!

Donovan Zusalim -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 62

Total : 6,076