Réparez vos affaires Communauté Boutique

Insignia Flex 11.6 Battery Replacement

Introduction

If your Insignia Flex 11.6 is not holding a charge or is not starting up, use this guide in replacing the battery.

Ce dont vous avez besoin

  1. Insignia Flex 11.6 Battery Replacement, Battery: étape 1, image 1 de 3 Insignia Flex 11.6 Battery Replacement, Battery: étape 1, image 2 de 3 Insignia Flex 11.6 Battery Replacement, Battery: étape 1, image 3 de 3

    • Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

    • Detach the keyboard from the screen in 2 different places by putting one hand on the keyboard while gently pulling up on the screen with the other hand.

    Modifier

  2. Insignia Flex 11.6 Battery Replacement: étape 2, image 1 de 2 Insignia Flex 11.6 Battery Replacement: étape 2, image 2 de 2

    • Remove the two 6.1 mm Phillips J000 screws from the bottom of the device. Use Phillips Screwdriver size J1.

    • If any screws are stripped, refer to the iFixit guide for how to remove a stripped screw.

    Modifier

  4. Insignia Flex 11.6 Battery Replacement: étape 3, image 1 de 3 Insignia Flex 11.6 Battery Replacement: étape 3, image 2 de 3 Insignia Flex 11.6 Battery Replacement: étape 3, image 3 de 3

    • Using a plastic opening tool, gently pry off the back cover.

    Modifier

  5. Insignia Flex 11.6 Battery Replacement: étape 4, image 1 de 3 Insignia Flex 11.6 Battery Replacement: étape 4, image 2 de 3 Insignia Flex 11.6 Battery Replacement: étape 4, image 3 de 3

    • Remove the electrical connector that connects to the battery to remove the power to the battery.

    Modifier

  6. Insignia Flex 11.6 Battery Replacement: étape 5, image 1 de 3 Insignia Flex 11.6 Battery Replacement: étape 5, image 2 de 3 Insignia Flex 11.6 Battery Replacement: étape 5, image 3 de 3
    Outil utilisé dans cette étape :
    Plastic Cards
    $2.99
    J'achète

    • Make sure not to bend the battery too excessively as if bent too much, it could rupture a cell within the battery and possibly cause a fire.

    • The battery is glued onto the device. To remove it, use a nylon spudger or plastic card to slide underneath the battery and scrape back and forth to remove the glue until the battery is removed from the device.

    Modifier

    Hi, great tutorial - thanks! Just wondering where you sourced the replacement battery? I've looked high and low googling but can't seem to find anywhere that sells them.

    David Ellis - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Connor Sweeney

Membre depuis le 09/28/16

449 Réputation

5 tutoriels rédigés

Badges: 16

+ 13 badges supplémentaires

Équipe

Eastern Washington University, Team 2-4, Mathisen Fall 2016 Membre de l'équipe Eastern Washington University, Team 2-4, Mathisen Fall 2016

EWU-MATHISEN-F16S2G4

4 membres

10 tutoriels rédigés

6 commentaires

Donde puedo adquirir la batería?

arag12 - Réponse

There are no screws on the bottom edge of my invicta model P11A8100. Can I bypass removing screws and proceed to removing the back?

Robert Sandfort - Réponse

There are no screws on the bottom of my model P11A8100. Can I bypass removal is said screws and proceed to opening the back?

Robert Sandfort - Réponse

Great instructions but I cant find a battery replacement. Battery number 3394122-2p

Hank Drabczak - Réponse

Great instructions but now I cant find the battery anywhere it is 3394122-2p

Hank Drabczak - Réponse

Saludos, necesito instalar el driver: Batería con método de control compatible con ACPI de microsoft, que me hace falta en mi tablet, flex 11.6 con w10 32 bits. mi correo: tnnaguiar@gmail.com

Jorantony Haaa - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 18

Total : 4,593