Réparez vos affaires Communauté Boutique

Insignia Flex 11.6 Screen Replacement

Introduction

The steps provided will walk you through the necessary replacement for the screen. Complete the prerequisites before performing these tasks.

Ce dont vous avez besoin

  1. Insignia Flex 11.6 Screen Replacement, Power Removal: étape 1, image 1 de 3 Insignia Flex 11.6 Screen Replacement, Power Removal: étape 1, image 2 de 3 Insignia Flex 11.6 Screen Replacement, Power Removal: étape 1, image 3 de 3

    • Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

    • Place the device on a firm surface with the device screen facing down.

    Modifier

  2. Insignia Flex 11.6 Screen Replacement: étape 2, image 1 de 2 Insignia Flex 11.6 Screen Replacement: étape 2, image 2 de 2

    • Remove 2, 6.1 mm Phillips J000 screws from the back of the device.

    • If any screws are stripped, refer to the ifixit guide for how to remove a stripped screw. Comment enlever une vis cassée

    Modifier

  3. Insignia Flex 11.6 Screen Replacement: étape 3, image 1 de 3 Insignia Flex 11.6 Screen Replacement: étape 3, image 2 de 3 Insignia Flex 11.6 Screen Replacement: étape 3, image 3 de 3
    Outil utilisé dans cette étape :
    Plastic Cards
    $2.99
    J'achète

    • Using a plastic tool and the plastic card, gently pry off the back cover.

    Modifier

  4. Insignia Flex 11.6 Screen Replacement: étape 4, image 1 de 3 Insignia Flex 11.6 Screen Replacement: étape 4, image 2 de 3 Insignia Flex 11.6 Screen Replacement: étape 4, image 3 de 3

    • Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

    Modifier

  5. Insignia Flex 11.6 Screen Replacement, Motherboard: étape 5, image 1 de 1

    • Unplug the 2 speaker's connection from the motherboard.

    Modifier

  7. Insignia Flex 11.6 Screen Replacement: étape 6, image 1 de 2 Insignia Flex 11.6 Screen Replacement: étape 6, image 2 de 2

    • Peel the yellow tape off from on top of the electrical connectors.

    Modifier

  8. Insignia Flex 11.6 Screen Replacement: étape 7, image 1 de 2 Insignia Flex 11.6 Screen Replacement: étape 7, image 2 de 2

    • Flip up the black cover pieces to expose the 3 electrical connectors.

    • Remove 3 electrical connectors by gently pulling back on them with some tweezers.

    Modifier

  9. Insignia Flex 11.6 Screen Replacement: étape 8, image 1 de 3 Insignia Flex 11.6 Screen Replacement: étape 8, image 2 de 3 Insignia Flex 11.6 Screen Replacement: étape 8, image 3 de 3

    • Unplug the 2 black ground wires from the motherboard by gently prying on them until they unhook from the motherboard.

    • Remove the black camera connector by gently prying on it until it unhooks.

    Modifier

  10. Insignia Flex 11.6 Screen Replacement: étape 9, image 1 de 2 Insignia Flex 11.6 Screen Replacement: étape 9, image 2 de 2

    • Using tweezers, remove the microphone from the the plastic cover.

    Modifier

  11. Insignia Flex 11.6 Screen Replacement: étape 10, image 1 de 1

    • Remove 5 - 3.4 mm Phillips J000 screws from the motherboard.

    • Motherboard pops out.

    Modifier

  12. Insignia Flex 11.6 Screen Replacement, Screen: étape 11, image 1 de 3 Insignia Flex 11.6 Screen Replacement, Screen: étape 11, image 2 de 3 Insignia Flex 11.6 Screen Replacement, Screen: étape 11, image 3 de 3

    • Remove battery by prying off with card.

    Modifier

  13. Insignia Flex 11.6 Screen Replacement: étape 12, image 1 de 2 Insignia Flex 11.6 Screen Replacement: étape 12, image 2 de 2

    • Peel back the copper color electrical connector with blue opening tool.

    Modifier

  14. Insignia Flex 11.6 Screen Replacement: étape 13, image 1 de 1

    • Remove 12 - 4.15mm J000 Phillips screws from the metal bracket.

    • Bracket will then come off.

    Modifier

  15. Insignia Flex 11.6 Screen Replacement: étape 14, image 1 de 1

    • Remove 1 - 3.4 mm J000 Phillips screw from metal plate bracket.

    Modifier

  16. Insignia Flex 11.6 Screen Replacement: étape 15, image 1 de 2 Insignia Flex 11.6 Screen Replacement: étape 15, image 2 de 2

    • Remove screen from case by prying with a card.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Connor Sweeney

Membre depuis le 09/28/16

449 Réputation

5 tutoriels rédigés

Badges: 16

+ 13 badges supplémentaires

Équipe

Eastern Washington University, Team 2-4, Mathisen Fall 2016 Membre de l'équipe Eastern Washington University, Team 2-4, Mathisen Fall 2016

EWU-MATHISEN-F16S2G4

4 membres

10 tutoriels rédigés

6 commentaires

The Flex 11.6" Model# NS-P11W7100 DOEST HAVE THOSE SCREWS RIGHT THERE!!!!!

Charles Kinnison - Réponse

yeah, thats the one I have. its quite a bit different. the speaker wires are soldered, too…

Joshua Francis -

mine doesn’t look like that…

Joshua Francis - Réponse

where can i get a new screen to buy?

florence sefaa - Réponse

Do you sell the insignia ns-p11w7100 tablet 11.6 inches screen? I need on to fix my broken part.

florence sefaa - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 18

Total : 4,444