Réparez vos affaires Communauté Boutique

Insignia NS-CLIP02 Motherboard Replacement

Introduction

This guide will demonstrate how to replace the motherboard of an Insignia NS-CLIP02. If your Insignia NS-CLIP02 is not performing as it should and you have already tried all of the troubleshooting tips, the motherboard may need to be replaced. The motherboard is an essential part of any device, and it is what keeps the device working well and it allows each individual part of the device to interact with each other. However, only replace the motherboard of the Insignia NS-CLIP02 if the device truly is not working and you have gone through all of the troubleshooting guides. Make sure the device is powered off/not plugged in before you begin the motherboard replacement.

Ce dont vous avez besoin

  1. Insignia NS-CLIP02 Motherboard Replacement, Motherboard: étape 1, image 1 de 1

    • Set the clock radio on the work space so the bottom of the device is showing.

    Traduire

  2. Insignia NS-CLIP02 Motherboard Replacement: étape 2, image 1 de 2 Insignia NS-CLIP02 Motherboard Replacement: étape 2, image 2 de 2

    • Use a metal spudger to peel back the adhesive sticker on the bottom of the clock.

    • You should see a single screw beneath the sticker.

    Traduire

  3. Insignia NS-CLIP02 Motherboard Replacement: étape 3, image 1 de 2 Insignia NS-CLIP02 Motherboard Replacement: étape 3, image 2 de 2

    • Using a plastic opening tool, peel off the adhesive gel stoppers.

    Traduire

  5. Insignia NS-CLIP02 Motherboard Replacement: étape 4, image 1 de 1

    • Use a Phillips screwdriver to remove the six 11 mm screws on the bottom of the device.

    Traduire

  6. Insignia NS-CLIP02 Motherboard Replacement: étape 5, image 1 de 1

    • Remove the bottom cover from the device to reveal the motherboard.

    Traduire

  7. Insignia NS-CLIP02 Motherboard Replacement: étape 6, image 1 de 1

    • Use a Phillips screwdriver to remove the 9.5 mm screw located near the center of the motherboard.

    Traduire

  8. Insignia NS-CLIP02 Motherboard Replacement: étape 7, image 1 de 1

    • Lift the motherboard away from the device.

    Traduire

  9. Insignia NS-CLIP02 Motherboard Replacement: étape 8, image 1 de 3 Insignia NS-CLIP02 Motherboard Replacement: étape 8, image 2 de 3 Insignia NS-CLIP02 Motherboard Replacement: étape 8, image 3 de 3

    • Disconnect the four cables connecting the motherboard to the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 6 autres contributeurs

Erik

Membre depuis le 02/19/15

405 Réputation

4 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

USF Tampa, Team 9-3, Leahy Winter 2015 Membre de l'équipe USF Tampa, Team 9-3, Leahy Winter 2015

USFT-LEAHY-W15S9G3

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 10

Total : 157