Réparez vos affaires Communauté Boutique

Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement

Introduction

The Insignia NS-CLIP02 can develop a problem with power auxiliary ports malfunctioning, but don’t worry. They’re replaceable! If your device is not charging, this may be a key indicator that the port needs to be replaced.

Use this simple step-by-step guide to replace your motherboard that contains the auxiliary port in 30 minutes or less.

Ce dont vous avez besoin

  1. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement, Power Auxiliary Port Replacement: étape 1, image 1 de 1

    • Locate the bottom of the device.

    Traduire

  2. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 2, image 1 de 1

    • Peel back the adhesive sticker using a metal spudger and remove the 11mm screw beneath the sticker with a Phillips head screw driver.

    Traduire

  3. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 3, image 1 de 1

    • Using a plastic spudger, peel off the adhesive gel stoppers.

    Traduire

  4. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 4, image 1 de 1

    • Unscrew the six 11mm screws with a Phillips head screw driver.

    Traduire

  6. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 5, image 1 de 1

    • Remove the bottom of the device to reveal the motherboard.

    Traduire

  7. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 6, image 1 de 1

    • Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.

    Traduire

  8. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 7, image 1 de 1

    • Lift the motherboard from the device and lie it face down. Beware of the cables plugged in on the back side

    Traduire

  9. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 8, image 1 de 1

    • Remove the plug to your left.

    Traduire

  10. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 9, image 1 de 1

    • Remove the plug to your right from the motherboard.

    Traduire

  11. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 10, image 1 de 1

    • Remove the plug in the front of the lcd screen plug.

    Traduire

  12. Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement: étape 11, image 1 de 1

    • Remove the LCD screen plug last. For reassembly, follow the instructions in reverse order, replacing the old motherboard with the new one to fix the power auxiliary port.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Erik

Membre depuis le 02/19/15

405 Réputation

4 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

USF Tampa, Team 9-3, Leahy Winter 2015 Membre de l'équipe USF Tampa, Team 9-3, Leahy Winter 2015

USFT-LEAHY-W15S9G3

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 2

30 derniers jours : 12

Total : 215