Réparez vos affaires Communauté Boutique

Insignia NS-CLIP02 Speaker replacement and troubleshooting

Introduction

This guide shows how to locate and repair broken connections to the speakers.

Ce dont vous avez besoin

  1. Insignia NS-CLIP02 Speaker replacement and troubleshooting, Motherboard: étape 1, image 1 de 1

    • Set the clock radio on the work space so the bottom of the device is showing.

    Traduire

  2. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 2, image 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 2, image 2 de 2

    • Use a metal spudger to peel back the adhesive sticker on the bottom of the clock.

    • You should see a single screw beneath the sticker.

    Traduire

  3. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 3, image 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 3, image 2 de 2

    • Using a plastic opening tool, peel off the adhesive gel stoppers.

    Traduire

  4. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 4, image 1 de 1

    • Use a Phillips screwdriver to remove the six 11 mm screws on the bottom of the device.

    Traduire

  5. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 5, image 1 de 1

    • Remove the bottom cover from the device to reveal the motherboard.

    Traduire

  6. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 6, image 1 de 1

    • Use a Phillips screwdriver to remove the 9.5 mm screw located near the center of the motherboard.

    Traduire

  8. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 7, image 1 de 1

    • Lift the motherboard away from the device.

    Traduire

  9. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 8, image 1 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 8, image 2 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 8, image 3 de 3

    • Disconnect the four cables connecting the motherboard to the device.

    Traduire

  10. Insignia NS-CLIP02 Speaker replacement and troubleshooting, Speaker: étape 9, image 1 de 1

    • Remove the three screws located along the center of the base.

    Traduire

  11. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 10, image 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 10, image 2 de 2

    • Remove the base from the display.

    Traduire

  12. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 11, image 1 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 11, image 2 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 11, image 3 de 3

    • Using a metal spudger, remove the plastic face plate from the display.

    Traduire

  13. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 12, image 1 de 1

    • With a phillips screwdriver, remove the six screws shown pictured to the left.

    Traduire

  14. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 13, image 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 13, image 2 de 2

    • Using the metal spudger, pry the speaker grilles from the display.

    Traduire

  15. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 14, image 1 de 1

    • Using the phillips screwdriver, remove the four screws pictured to the left.

    Traduire

  16. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 15, image 1 de 1

    • Separate the two pieces of the display as shown.

    Traduire

  17. Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 16, image 1 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 16, image 2 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: étape 16, image 3 de 3

    • You can see that there are several points where connections to the speaker are soldered.

    • If all connections are soldered then replacement may be necessary.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Aubrey

Membre depuis le 02/24/15

214 Réputation

2 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

USF Tampa, Team 9-3, Leahy Winter 2015 Membre de l'équipe USF Tampa, Team 9-3, Leahy Winter 2015

USFT-LEAHY-W15S9G3

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 10

Total : 175