Insignia NS-CLOPP2 Speaker Replacement

Introduction

An Insignia NS-CLOPP2 Speaker is used to wake one up with a clear alarm for waking up on time as well as a built-in radio tuner for listening entertainment. Here are the tools, skills, and requirements needed to replace a broken Insignia NS-CLOPP2 Speaker that is no longer creating any type of noise or the speaker is creating gray noise.

Ce dont vous avez besoin

Étape 1 Speaker

Insignia NS-CLOPP2 Speaker Replacement, Speaker: étape 1, image 1 de 1

First, unscrew the back panel with a 1/3 Phillips screwdriver, and make sure the motherboard has been pulled out, not cutting any of the wires attached, exposing the blue speaker.

Traduire

Étape 2

Locate the speaker, the dark blue colored circular device, pictured in the center of the photo.

Traduire

Étape 3

Using a plastic opening tool, scrape off the glue attaching the speaker to the black plastic of the clock.

Traduire

Étape 4

Lastly, once the adhesive has been removed, gently lift the speaker out of place.
To put a replacement speaker in, use technology-friendly adhesive to glue it back in place.
To reassemble your device, follow these instructions in reverse order.