Réparez vos affaires Communauté Boutique

Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement

Introduction

Make sure the device is powered off before you start following the instructions. If you have a physical disability with your hand, wrist, or arm consider having a different individual help you because the tasks require steady hands. Be sure to work on a flat surface and to not lose any of the small parts because they are very small and can be lost easily.

Ce dont vous avez besoin

  1. Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement, Battery: étape 1, image 1 de 1

    • Remove the rubber sleeve.

    Traduire

  2. Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 2, image 1 de 2 Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 2, image 2 de 2

    • Use the specified screwdriver to unscrew the ten screws on the back cover.

    Traduire

  3. Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 3, image 1 de 2 Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 3, image 2 de 2

    • Remove the back cover. Be careful to not lose any of the screws because they are extremely small and can be easily lost.

    Traduire

  5. Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 4, image 1 de 2 Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 4, image 2 de 2

    • The battery will be attached to the back cover with sticky tape. Unplug the wires connecting the battery to the speaker.

    Traduire

    • Using one of the four blue opening tools, pry the battery off of the back cover.

    Traduire

  7. Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 6, image 1 de 1

    • Stick the new battery to the back cover using sticky tape.

    Traduire

  8. Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 7, image 1 de 1

    • Connect the wire from the new battery to the bluetooth speaker.

    Traduire

  9. Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 8, image 1 de 3 Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 8, image 2 de 3 Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement: étape 8, image 3 de 3

    • Place cover back on and using the iFixit screwdriver PH000, screw the ten screws back onto the back cover.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Erin Steele

Membre depuis le 03/08/17

649 Réputation

5 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UMass Dartmouth, Team S5-G2, Botvin Spring 2017 Membre de l'équipe UMass Dartmouth, Team S5-G2, Botvin Spring 2017

UMASSD-BOTVIN-S17S5G2

2 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 295