Introduction

Does your device not turn on or does the power run out quickly? It is probably the result of a dysfunctional battery. This guide will show you how to remove your battery for a replacement. Be aware that this guide has some steps that can possibly damage the device.

Pièces

Aucune pièce nécessaire.

Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.
  • Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.

Ajouter un commentaire

Detach the back cover by carefully pulling up and out on the back plastic casing.
  • Detach the back cover by carefully pulling up and out on the back plastic casing.

  • Do not pull apart the red wire connecting the battery to the device.

Ajouter un commentaire

  • Use the plastic opening tool to reach underneath the battery, opposite from the side with the red wire, and remove it from its plastic case.

  • Be careful to not tear the wires while opening the case.

Ajouter un commentaire

  • Reach under the white plastic wire connector using the plastic opening tool and disconnect it from the socket.

  • Do not disconnect wires from plastic connector.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

David Poltorak

Membre depuis le 18/04/2013

4 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 12-36, Amido Spring 2013 Membre de l'équipe Cal Poly, Team 12-36, Amido Spring 2013

CPSU-AMIDO-S13S12G36

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 819