Aller au contenu principal

Insignia Sport NS-4V17 Front Case Cover Replacement

Ce dont vous avez besoin

  1. Insignia Sport NS-4V17 Front Case Cover Replacement, Battery: étape 1, image 1 de 1
    • Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.

  2. Insignia Sport NS-4V17 Front Case Cover Replacement: étape 2, image 1 de 2 Insignia Sport NS-4V17 Front Case Cover Replacement: étape 2, image 2 de 2
    • Detach the back cover by carefully pulling up and out on the back plastic casing.

    • Do not pull apart the red wire connecting the battery to the device.

  3. Insignia Sport NS-4V17 Front Case Cover Replacement: étape 3, image 1 de 1
    • Use the plastic opening tool to reach underneath the battery, opposite from the side with the red wire, and remove it from its plastic case.

    • Be careful to not tear the wires while opening the case.

  4. Insignia Sport NS-4V17 Front Case Cover Replacement: étape 4, image 1 de 1
    • Reach under the white plastic wire connector using the plastic opening tool and disconnect it from the socket.

    • Do not disconnect wires from plastic connector.

  5. Insignia Sport NS-4V17 Front Case Cover Replacement, Front Case Cover: étape 5, image 1 de 2 Insignia Sport NS-4V17 Front Case Cover Replacement, Front Case Cover: étape 5, image 2 de 2
    • Remove the four corner plastic covers on the back of the device using the plastic opening tool.

  6. Insignia Sport NS-4V17 Front Case Cover Replacement: étape 6, image 1 de 1
    • Using a Philips #00 screwdriver remove all four 4.5mm corner screws located underneath the corner pads.

  7. Insignia Sport NS-4V17 Front Case Cover Replacement: étape 7, image 1 de 3 Insignia Sport NS-4V17 Front Case Cover Replacement: étape 7, image 2 de 3 Insignia Sport NS-4V17 Front Case Cover Replacement: étape 7, image 3 de 3
    • Carefully wedge the plastic opening tool into either long side of the device.

    • Slowly move the plastic opening tool along the side of the device, separating the front and back case covers.

    • Repeat these steps on the other side of the device.

  8. Insignia Sport NS-4V17 Front Case Cover Replacement: étape 8, image 1 de 1
    • Once the front cover is loose, use your fingers to remove the front case cover for a new installation.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Wesley Ballar

Membre depuis le 04/18/13

88 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 12-36, Amido Spring 2013 Membre de l'équipe Cal Poly, Team 12-36, Amido Spring 2013

CPSU-AMIDO-S13S12G36

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 347