Aller au contenu principal

Installing a Petsafe Removable Dog Panel

Ce dont vous avez besoin

  1. Installing a Petsafe Removable Dog Panel, Petsafe Dog Panel: étape 1, image 1 de 1
    • Make sure you have all the tools necessary.

  2. Installing a Petsafe Removable Dog Panel: étape 2, image 1 de 1
    • Receive your PetSafe dog door in the mail.

  3. Installing a Petsafe Removable Dog Panel: étape 3, image 1 de 2 Installing a Petsafe Removable Dog Panel: étape 3, image 2 de 2
    • Measure the height of the sliding glass door frame.

  4. Installing a Petsafe Removable Dog Panel: étape 4, image 1 de 3 Installing a Petsafe Removable Dog Panel: étape 4, image 2 de 3 Installing a Petsafe Removable Dog Panel: étape 4, image 3 de 3
    • Remove your lock latch from the sliding door frame.

    • Lock latches may vary

  5. Installing a Petsafe Removable Dog Panel: étape 5, image 1 de 2 Installing a Petsafe Removable Dog Panel: étape 5, image 2 de 2
    • Slide the top of your dog panel into the top track of the sliding glass door.

    • Place the bottom portion of the dog panel into the bottom track of the sliding glass door.

  6. Installing a Petsafe Removable Dog Panel: étape 6, image 1 de 2 Installing a Petsafe Removable Dog Panel: étape 6, image 2 de 2
    • Measure 12” from the top, down the side of your sliding glass door frame and mark it.

    • Mark 1” above the pet flap onto the edge of your sliding glass door.

  7. Installing a Petsafe Removable Dog Panel: étape 7, image 1 de 3 Installing a Petsafe Removable Dog Panel: étape 7, image 2 de 3 Installing a Petsafe Removable Dog Panel: étape 7, image 3 de 3
    • With a 9/64ths drill bit, drill clearance holes into the marks made on the sliding glass door frame

    • DO NOT GO THROUGH THE DOG PANEL

  8. Installing a Petsafe Removable Dog Panel: étape 8, image 1 de 3 Installing a Petsafe Removable Dog Panel: étape 8, image 2 de 3 Installing a Petsafe Removable Dog Panel: étape 8, image 3 de 3
    • Fasten the panel to the interior side of the sliding glass frame with the provided ⅝” screws.

    • MAKE SURE YOU ARE DRILLING OUTSIDE OF THE RIBBED LINE ON THE DOG PANEL.

    • DO NOT OVERTIGHTEN.

  9. Installing a Petsafe Removable Dog Panel: étape 9, image 1 de 2 Installing a Petsafe Removable Dog Panel: étape 9, image 2 de 2
    • Tighten the screws with a screwdriver.

  10. Installing a Petsafe Removable Dog Panel: étape 10, image 1 de 3 Installing a Petsafe Removable Dog Panel: étape 10, image 2 de 3 Installing a Petsafe Removable Dog Panel: étape 10, image 3 de 3
    • Repeat steps 8 and 9 to secure the dog panel into place. Follow these steps when drilling into the clearance hole marked at the top of the frame.

  11. Installing a Petsafe Removable Dog Panel: étape 11, image 1 de 1
    • Slide your sliding door flush against the dog door.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Joshua Novello

Membre depuis le 10/26/18

196 Réputation

1 tutoriel rédigé

Équipe

UC Davis, Team S1-G1, Bender Fall 2018 Membre de l'équipe UC Davis, Team S1-G1, Bender Fall 2018

UCD-BENDER-F18S1G1

3 membres

1 tutoriel rédigé

2 commentaires

My dog won’t push hard enough for the magnet to open. Is there a way to temporarily remove the magnet on either the frame or the flap?

LisaD - Réponse

LisaD put a piece of masking tape over the magnet or a couple of layers of tape to make it easier to open maybe?

Robert Merry -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 33

Total : 1,068