Introduction

The float valve requires its rubber seal to function properly. If this or another part of the valve is missing, it will not be able to function properly and needs to be replaced. This guide will demonstrate how to remove and replace the float valve of your instant pot.

Outils

Aucun outil requis.

Pièces

Open the lid of the Instant Pot.  Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.
  • Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

  • Turn the lid upside down to access the float valve.

Ajouter un commentaire

Remove the silicone cover by grasping it and pulling upward.
  • Remove the silicone cover by grasping it and pulling upward.

  • Push down on the metal part of the float valve to pop it out.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

paola alvarez

Membre depuis le 24/01/2018

480 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team S1-G4, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S1-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 18

Total : 117