Aller au contenu principal

Introduction

The plastic base covers the electronic components inside the instant pot. Before you can touch anything inside of the device the base must be removed.

Pièces

Aucune pièce spécifiée.

  1. Take off the lid of the Instant Pot.  Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base. Take off the lid of the Instant Pot.  Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.
    • Take off the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

  2. Take out the inner pot and place it somewhere out of the way.
    • Take out the inner pot and place it somewhere out of the way.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Flip the Instant Pot over on its top so that the base is facing upward.
    • Flip the Instant Pot over on its top so that the base is facing upward.

  5. Remove the single 12mm Phillips #2 screw holding the base to the device.
    • Remove the single 12mm Phillips #2 screw holding the base to the device.

  6. Rotate the base counter-clockwise then gently lift the base off of the device.
    • Rotate the base counter-clockwise then gently lift the base off of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

paola alvarez

Membre depuis le 24/01/2018

489 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team S1-G4, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S1-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G4

4 membres

6 tutoriels rédigés

Hi, I would like to know, where can I buy a new plastic base? Thank you

nathaliawed - Réponse

Hello where can I buy the plastic base

Maureen - Réponse

I would like to buy one of these for an 8 Qt model….very hard to source this and terrible customer support as this seems to be a issue for many that burned theirs.

davidghamilton - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 28

30 derniers jours : 78

Total : 1,564