Réparez vos affaires Communauté Boutique

Instant Pot Smart-60 Plastic Base Replacement

Introduction

The plastic base covers the electronic components inside the instant pot. Before you can touch anything inside of the device the base must be removed.

Ce dont vous avez besoin

  1. Instant Pot Smart-60 Plastic Base Replacement, Plastic Base: étape 1, image 1 de 2 Instant Pot Smart-60 Plastic Base Replacement, Plastic Base: étape 1, image 2 de 2

    • Take off the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

    Modifier

  2. Instant Pot Smart-60 Plastic Base Replacement: étape 2, image 1 de 1

    • Take out the inner pot and place it somewhere out of the way.

    Modifier

  4. Instant Pot Smart-60 Plastic Base Replacement: étape 3, image 1 de 1

    • Flip the Instant Pot over on its top so that the base is facing upward.

    Modifier

    Where can I buy that base. Thank you.

    Belinda Berka - Réponse

  5. Instant Pot Smart-60 Plastic Base Replacement: étape 4, image 1 de 1

    • Remove the single 12mm Phillips #2 screw holding the base to the device.

    Modifier

  6. Instant Pot Smart-60 Plastic Base Replacement: étape 5, image 1 de 1

    • Rotate the base counter-clockwise, then gently lift the base off of the device.

    Modifier

    Where can I get this base plate?

    Muhammad Abdullah Sabooani - Réponse

    That small round base. Where can you buy one. Thank you.

    Belinda Berka - Réponse

    I am also looking for my pot. Any suggestions?

    Sai Parmar - Réponse

    I need one tô. Please advise. Thanks!

    le.dieuai - Réponse

    Where did you get the base? I need one

    Sarah Parker - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

paola alvarez

Membre depuis le 01/24/18

534 Réputation

4 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team S1-G4, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S1-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G4

4 membres

6 tutoriels rédigés

13 commentaires

Hi, I would like to know, where can I buy a new plastic base? Thank you

nathaliawed - Réponse

Hello where can I buy the plastic base

Maureen - Réponse

I would like to buy one of these for an 8 Qt model….very hard to source this and terrible customer support as this seems to be a issue for many that burned theirs.

davidghamilton - Réponse

Did you ever find out where you can buy this part.

Thank you. Belinda

Belinda Berka - Réponse

Do you carry the replacement for this. Thanks

khai01 - Réponse

Has anyone found the replacement part? It isn't available through Instant Pot customer service.

Patti Gregory - Réponse

On my Instant Pot Nova Plus series, the screw on the bottom plate is a T15 instead of Philips #2

Cynthia Roessler - Réponse

Hi

We also need a new plastic base as ours got accidently melted on the stove.

Any sources for replacement part

Thanks

Doug - Réponse

Does anyone know where to by the plastic bottom

pljonesvfd11 - Réponse

Hi,

We also need a new plastic base as ours got accidentally melted on the stove.

Any sources for replacement part

Thiago Pontelli - Réponse

Hey I would like to buy this, and could I know how I can get it?

Kaylee Chu - Réponse

I need one - the whole base. Who else did burn one :-) ??

Were do I get this item? All other appliances I'm used to have a blow-up drawing, where every single item usually can be sourced.

Had higher expectations for Instant Pot in regards to spare parts, one of the reasons I did not want a knock-off,

Basti_D - Réponse

If the base can’t be found, what is the point of having instructions on how to repair it? I can’t find a base either!

Gerald Crusader - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 23

Total : 6,667