Aller au contenu principal

Inter-tel IP 8660 Button Pad Replacement

Ce dont vous avez besoin

  1. Inter-tel IP 8660 Button Pad Replacement, Rear Cover: étape 1, image 1 de 1
    • Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

  2. Inter-tel IP 8660 Button Pad Replacement: étape 2, image 1 de 3 Inter-tel IP 8660 Button Pad Replacement: étape 2, image 2 de 3 Inter-tel IP 8660 Button Pad Replacement: étape 2, image 3 de 3
    • Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.

    • 8 mm long

    • 11 mm long

  3. Inter-tel IP 8660 Button Pad Replacement: étape 3, image 1 de 1
    • Lift up the back cover and set it aside.

  4. Inter-tel IP 8660 Button Pad Replacement, Internal speaker: étape 4, image 1 de 1
    • While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.

  5. Inter-tel IP 8660 Button Pad Replacement: étape 5, image 1 de 1
    • Lift up the speaker.

  6. Inter-tel IP 8660 Button Pad Replacement, Button Pad: étape 6, image 1 de 1
    • Lift up the motherboard and set aside

  7. Inter-tel IP 8660 Button Pad Replacement: étape 7, image 1 de 1
    • Peel off all rubber button covers.

  8. Inter-tel IP 8660 Button Pad Replacement: étape 8, image 1 de 1
    • Remove all plastic buttons. (Note: Look at the initial picture for locations of each button set)

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Équipe

Cal Poly, Team 11-24, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 11-24, Maness Winter 2012

CPSU-MANESS-W12S11G24

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 762