Aller au contenu principal

Inter-tel IP 8660 LCD Screen Replacement

Ce dont vous avez besoin

  1. Inter-tel IP 8660 LCD Screen Replacement, Rear Cover: étape 1, image 1 de 1
    • Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

  2. Inter-tel IP 8660 LCD Screen Replacement: étape 2, image 1 de 3 Inter-tel IP 8660 LCD Screen Replacement: étape 2, image 2 de 3 Inter-tel IP 8660 LCD Screen Replacement: étape 2, image 3 de 3
    • Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.

    • 8 mm long

    • 11 mm long

  3. Inter-tel IP 8660 LCD Screen Replacement: étape 3, image 1 de 1
    • Lift up the back cover and set it aside.

  4. Inter-tel IP 8660 LCD Screen Replacement, Internal speaker: étape 4, image 1 de 1
    • While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.

  5. Inter-tel IP 8660 LCD Screen Replacement: étape 5, image 1 de 1
    • Lift up the speaker.

  6. Inter-tel IP 8660 LCD Screen Replacement, LCD Screen: étape 6, image 1 de 3 Inter-tel IP 8660 LCD Screen Replacement, LCD Screen: étape 6, image 2 de 3 Inter-tel IP 8660 LCD Screen Replacement, LCD Screen: étape 6, image 3 de 3
    • Lift up the motherboard out of its housing in the front cover of the phone.

    • Set the front cover and button pads aside.

  7. Inter-tel IP 8660 LCD Screen Replacement: étape 7, image 1 de 3 Inter-tel IP 8660 LCD Screen Replacement: étape 7, image 2 de 3 Inter-tel IP 8660 LCD Screen Replacement: étape 7, image 3 de 3
    • Using tweezers, pinch the highlighted connective clips together and depress. Start with the clips in the middle of the motherboard first.

    • Note: There are four clips, one at each corner of the LCD screen.

  8. Inter-tel IP 8660 LCD Screen Replacement: étape 8, image 1 de 1
    • Flip the motherboard over so that the LCD screen is facing upward.

  9. Inter-tel IP 8660 LCD Screen Replacement: étape 9, image 1 de 2 Inter-tel IP 8660 LCD Screen Replacement: étape 9, image 2 de 2
    • Push the black clip holding the ribbon cable out of its casing using the plastic opening tool.

    • This is done using the spudger to lift one side out of its housing.

    • Reposition the spudger to the other side of the black clip and push it flush with the other end.

    • Note: The black clip pushes out of the housing and does not come completely loose.

  10. Inter-tel IP 8660 LCD Screen Replacement: étape 10, image 1 de 3 Inter-tel IP 8660 LCD Screen Replacement: étape 10, image 2 de 3 Inter-tel IP 8660 LCD Screen Replacement: étape 10, image 3 de 3
    • Pull gently on the ribbon cable so that it comes loose from the black clip.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Équipe

Cal Poly, Team 11-24, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 11-24, Maness Winter 2012

CPSU-MANESS-W12S11G24

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 833