JBL Flip disassembly

Introduction

The JBL Flip 1 is an excellent speaker, but we have noticed there are some issues with it. In order to fix these issues, you must first understand how to disassemble the Flip’s outer layers. This guide will teach you how to do this safely and precisely.

Ce dont vous avez besoin

Étape 1 JBL Flip disassembly

JBL Flip disassembly, JBL Flip disassembly: étape 1, image 1 de 3

JBL Flip disassembly, JBL Flip disassembly: étape 1, image 2 de 3

JBL Flip disassembly, JBL Flip disassembly: étape 1, image 3 de 3

On the end with the buttons, remove the end cap using the flat head screwdriver to get between the rubber lining and the plastic.
After the cap is removed, unscrew the two 3.3mm screws using a size 1 ph screw driver.

Modifier

Étape 2

JBL Flip disassembly: étape 2, image 3 de 3

Unscrew four 3.3mm screws on each end of the JBL using a size 1 ph screw driver (8 screws total).

Modifier

Étape 3

JBL Flip disassembly: étape 3, image 3 de 3

Remove outermost white casing by gently lifting up on one side.
Remove two 5mm screws holding the silver back plate in place with a size 2 ph screw driver.
Gently lift up and remove the silver casing.

Modifier

Étape 4

Remove last white back plate to expose the back of the speaker cover.

Modifier

Étape 5

JBL Flip disassembly: étape 5, image 3 de 3

Pry the four tabs on each side of the speaker cover (8 tabs total).
Pry the two tabs on each end to remove the cover (4 tabs total).
Slide speaker out of metal speaker cover.

Modifier

Étape 6

JBL Flip disassembly: étape 6, image 3 de 3

Remove 5mm screw in the middle of the back of the device with a size 2 ph screw driver.
Unscrew the two 5mm screws on each side using a size 2 ph screwdriver.
Open the speaker.