Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
If you are experiencing any difficulties using the buttons on your JBL Pulse 2, you may need to replace the button circuit board.
Ce dont vous avez besoin
-
-
Remove the rubber rings from either end of the device.
-
If there is difficulty in lifting the rings from the device, use the metal spudger.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.