Réparez vos affaires Communauté Boutique

JVC Adixxion GC-XA1BU LCD Screen Replacement

Introduction

This guide will outline the step-by-step process of replacing the LCD screen of the JVC Adixxion GC-XA1BU.

Ce dont vous avez besoin

  1. JVC Adixxion GC-XA1BU LCD Screen Replacement, Battery: étape 1, image 1 de 1

    • Find the side of the camera with the black switch shown.

    Traduire

  2. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 2, image 1 de 1

    • Push down on the black switch.

    Traduire

  3. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 3, image 1 de 1

    • Slide the battery cover back while pushing down on the black switch.

    Traduire

  4. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 4, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 4, image 2 de 2

    • Open the battery compartment and push the blue battery release switch.

    Traduire

  5. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 5, image 1 de 1

    • Remove the battery from the camera.

    Traduire

  6. JVC Adixxion GC-XA1BU LCD Screen Replacement, Battery Cover: étape 6, image 1 de 1

    • Remove the two Phillips screws (4mm x 3mm) using the Phillips #00 screwdriver.

    Traduire

  8. JVC Adixxion GC-XA1BU LCD Screen Replacement, LCD Cover: étape 7, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement, LCD Cover: étape 7, image 2 de 2

    • Remove the 8 screws (5mm x 4mm) from the corners of both the front and back of the camera (4 screws on each side) using the T6 Torx screwdriver.

    Traduire

  9. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 8, image 1 de 1

    • Carefully open the camera as shown and gently peel off the black cover tape.

    Traduire

  10. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 9, image 1 de 3 JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 9, image 2 de 3 JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 9, image 3 de 3

    • Carefully lift up and remove the cable ribbon clip using the tweezers.

    Traduire

  11. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 10, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 10, image 2 de 2

    • Carefully grasp and remove the ribbon cable using the tweezers.

    Traduire

  12. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 11, image 1 de 1

    • Turn the camera as shown and carefully remove the glue from the connector.

    Traduire

  13. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 12, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 12, image 2 de 2

    • Carefully pull the white clip out of the casing using the tweezers.

    Traduire

  14. JVC Adixxion GC-XA1BU LCD Screen Replacement, Zoom (+/-) Buttons: étape 13, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement, Zoom (+/-) Buttons: étape 13, image 2 de 2

    • Use a Phillips #00 screwdriver to remove the two top screws (4mmx x 3mm). Once the screws are removed, carefully lift off the silver plate using Tweezers.

    Traduire

  15. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 14, image 1 de 1

    • Once you have lifted and removed the silver plate, use a Phillips #00 screwdriver to remove the two bottom screws (4mm x 3mm).

    Traduire

  16. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 15, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 15, image 2 de 2

    • Using Tweezers, gently pull the red, black, and white threaded wire to disconnect it, then remove the attached panel as shown.

    Traduire

  17. JVC Adixxion GC-XA1BU LCD Screen Replacement, LCD Screen: étape 16, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement, LCD Screen: étape 16, image 2 de 2

    • Carefully lift up and remove the LCD screen using the tweezers.

    Traduire

  18. JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 17, image 1 de 2 JVC Adixxion GC-XA1BU LCD Screen Replacement: étape 17, image 2 de 2

    • The screen as shown if removed properly.

    Traduire
Conclusion

Follow these steps in reverse order with the new LCD screen in order to complete the replacement.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

Christina Michelle Johnson

Membre depuis le 01/15/15

1 047 Réputation

8 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

USF Tampa, Team 1-2, Tanski Winter 2015 Membre de l'équipe USF Tampa, Team 1-2, Tanski Winter 2015

USFT-TANSKI-W15S1G2

4 membres

8 tutoriels rédigés

0 commentaires de tutoriel

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 7

Total : 779