JVC KW-V820BT Front Panel Assembly Replacement

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Introduction

The first step in the service of this device begins with the removal of the front panel assembly. This will allow access to other serviceable components within the device.

Ce dont vous avez besoin

Étape 1 Front Panel Assembly

JVC KW-V820BT Front Panel Assembly Replacement, Front Panel Assembly: étape 1, image 1 de 3

JVC KW-V820BT Front Panel Assembly Replacement, Front Panel Assembly: étape 1, image 2 de 3

JVC KW-V820BT Front Panel Assembly Replacement, Front Panel Assembly: étape 1, image 3 de 3

Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver.

Traduire

Étape 2

Remove three steel-finish, pan-head, 1/64 x 3/16" machine screws identified in the photograph, using the Phillips #0 screwdriver.

Traduire

Étape 3

JVC KW-V820BT Front Panel Assembly Replacement: étape 3, image 3 de 3

Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers.

Traduire

Étape 4

Gently remove the front panel from the steel enclosure.

Traduire

Étape 5

JVC KW-V820BT Front Panel Assembly Replacement: étape 5, image 3 de 3

Gently separate the ribbon cable from from ZIF connector on the circuit board using a metal smudger.
Be careful not to scratch or damage components or features of the circuit board with the metal spudger

Traduire