Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove three steel-finish, pan-head, 1/64 x 3/16" machine screws identified in the photograph, using the Phillips #0 screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently remove the front panel from the steel enclosure.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently separate the ribbon cable from from ZIF connector on the circuit board using a metal smudger.
-