Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the four 3.5mm side screws with a Phillips #1 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to unhook the plastic clips on the sides and top of the front panel. There are two clips on each side and one clip on the top.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the top of the front panel out and down to remove front panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the three 5mm screws from the top of the device using a Phillips #1 screwdriver.
-
Lift up to remove the top casing.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip up the black clasp with a spudger to disconnect the large white ribbon cable connecting the CD drive to the board underneath.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.