Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Pièces

Aucune pièce spécifiée.

  1. Locate the face-plate eject button.
    • Locate the face-plate eject button.

  2. Press the eject button with your forefinger. Remove the face-plate.
    • Press the eject button with your forefinger.

    • Remove the face-plate.

  3. Starting on the top side, pop the front panel frame out. Remove the face-plate frame.
    • Starting on the top side, pop the front panel frame out.

    • Remove the face-plate frame.

  4. Use the plastic opening tool to pry open the tabs. Repeat on the opposite side.
    • Use the plastic opening tool to pry open the tabs.

    • Repeat on the opposite side.

  5. Remove the front panel.
    • Remove the front panel.

  6. Use the Phillips #0 Screwdriver to remove the screws off of the metal case. Use the Phillips #0 Screwdriver to remove the screws off of the metal case. Use the Phillips #0 Screwdriver to remove the screws off of the metal case.
    • Use the Phillips #0 Screwdriver to remove the screws off of the metal case.

  7. Carefully separate the top and bottom halves of the metal case apart. Do not separate the metal case halves completely. Carefully pull the DVD-Drive ribbon cable from the motherboard.
    • Carefully separate the top and bottom halves of the metal case apart.

    • Do not separate the metal case halves completely.

    • Carefully pull the DVD-Drive ribbon cable from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Pablo Cabrera

Membre depuis le 04/10/2016

201 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 2-5, Cagle Fall 2016 Membre de l'équipe USF Tampa, Team 2-5, Cagle Fall 2016

USFT-CAGLE-F16S2G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 179