Réparez vos affaires Communauté Boutique

Kenwood KDC-BT565U LCD Screen Replacement

Introduction

If the LCD screen in the KDC-BT565U is not displaying text properly, or suffering from too much fading/dimness, it could be a sign that the screen needs replacing. This guide shows you how to easily replace this LCD screen.

Ce dont vous avez besoin

  1. Kenwood KDC-BT565U LCD Screen Replacement, Face Plate: étape 1, image 1 de 1

    • Press the eject button on the bottom left corner of the face plate.

    Modifier

  2. Kenwood KDC-BT565U LCD Screen Replacement: étape 2, image 1 de 3 Kenwood KDC-BT565U LCD Screen Replacement: étape 2, image 2 de 3 Kenwood KDC-BT565U LCD Screen Replacement: étape 2, image 3 de 3

    • Begin by slightly lifting the face plate out from the side located by the release button.

    • Slide towards the side of the eject button, then completely lift out.

    Modifier

  3. Kenwood KDC-BT565U LCD Screen Replacement, LCD Screen: étape 3, image 1 de 1

    • Remove the four 7.5mm Phillips #0 screws on the back of the face-plate.

    Modifier

  5. Kenwood KDC-BT565U LCD Screen Replacement: étape 4, image 1 de 2 Kenwood KDC-BT565U LCD Screen Replacement: étape 4, image 2 de 2

    • Use a spudger or prying tool to open the back of the face plate. Pry the back at multiple points around the edge of the face plate. This will take some patience. Applying too much force risks breaking the plastic.

    Modifier

  6. Kenwood KDC-BT565U LCD Screen Replacement: étape 5, image 1 de 2 Kenwood KDC-BT565U LCD Screen Replacement: étape 5, image 2 de 2

    • Lift and remove the motherboard to reveal the inside of the front panel.

    • You might need to pry the right side up with the spudger.

    Modifier

  7. Kenwood KDC-BT565U LCD Screen Replacement: étape 6, image 1 de 3 Kenwood KDC-BT565U LCD Screen Replacement: étape 6, image 2 de 3 Kenwood KDC-BT565U LCD Screen Replacement: étape 6, image 3 de 3

    • Use the plastic spudger to straighten out the six pegs to allow the removal of the LCD screen.

    • Make sure to use an ESD-safe prying tool when working on electrical boards. Here, we are using a plastic tool, not a metal one.

    Modifier

  8. Kenwood KDC-BT565U LCD Screen Replacement: étape 7, image 1 de 3 Kenwood KDC-BT565U LCD Screen Replacement: étape 7, image 2 de 3 Kenwood KDC-BT565U LCD Screen Replacement: étape 7, image 3 de 3

    • Lift the LCD screen to remove and replace it.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Yusef Flowers

Membre depuis le 02/15/17

137 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

USF Tampa, Team S2-G5, Lacy Spring 2017 Membre de l'équipe USF Tampa, Team S2-G5, Lacy Spring 2017

USFT-LACY-S17S2G5

4 membres

11 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 446