Introduction
This guide shows you how to replace the metal sleeve on the Kenwood KDC-BT565U. This acts mostly as a prerequisite guide for replacing internal components such as the CD drive, however, the metal sleeve is sold as a replaceable part on the Kenwood website (link in the parts section).
Note: this requires the KDC-BT565U to be separated from the car. If the unit is currently in an automobile, it needs to be unmounted. This may require specialist assistance.
Ce dont vous avez besoin
-
-
Grasp the outer metal sleeve with one hand and the front of the unit with the other.
-
Slide the sleeve back until it comes off the unit.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
Équipe
USF Tampa, Team S2-G5, Lacy Spring 2017 Membre de l'équipe USF Tampa, Team S2-G5, Lacy Spring 2017
USFT-LACY-S17S2G5
4 membres
11 tutoriels rédigés
